products details

Home > Products >

Single‑Stage LC EMI Power Filter VIP4‑1B‑06, 6A RMS 115/250VAC Bolt Mount Metal Housing Common‑Mode & Differential‑Mode Noise Suppressor for Power Input EMC Compliance

All Category

Flat Ferrite Core

Miss. Vicky Lee

vip6@szviip.com

19925448748

19925448748

Contact Now

Single‑Stage LC EMI Power Filter VIP4‑1B‑06, 6A RMS 115/250VAC Bolt Mount Metal Housing Common‑Mode & Differential‑Mode Noise Suppressor for Power Input EMC Compliance

Brand Name:	Weiaipu
Model Number:	VIP4-1B-06(B041Q0994)
MOQ:	120PCS
Price:	6-8USD
Packaging Details:	Carton
Payment Terms:	T/T

Detail Information

Product Description

Detail Information

Place of Origin:

Shen Zhen

Certification:

CQC CE ROHS TUV CB REACH UL

Voltage Rating:

115/250VAC

Leakagecurrent:

0.5 mA Max @115VAC / 60 Hz1.0 mA Max @250VAC / 50 Hz

Operating Frequency:

50/60Hz

Current Rating:

6A RMS Max

Productname:

Single Phase EMI Filter

Insertion Loss:

Tested Under 50‑Ohm System (data For Reference Only)

Supply Ability:

3000PCS/WEEK

Highlight:

Single-Stage LC EMI Power Filter

6A 115/250VAC Bolt Mount Filter

Common-Mode Differential-Mode Noise Suppressor

Product Description

VIP4‑1B‑06 Single‑Stage Single‑Phase EMI Power Line Filter 6A RMS 115/250VAC Metal Case Bolt Mount EMC Noise Suppression Filter for Industrial Automation Test Instrument Power

Product Overview

The VIP4‑1B‑06 is a single‑phase chassis‑mount EMI power filter engineered by VIIP Electronics, specifically built to resolve conducted emission EMC test failures for AC‑powered equipment. Rated at 6A RMS for 115/250VAC 50/60Hz mains supply, this single‑stage LC filter utilizes common‑mode choke together with X and Y capacitors to suppress common‑mode and differential‑mode noise coupled onto power input lines.

Its metal shielded housing minimizes secondary noise coupling inside equipment cabinets. Strictly controlled leakage current, high‑voltage withstand capability and wide temperature tolerance guarantee consistent filtering performance from prototype debugging to mass production.

Highlights

Purpose‑built for solving conducted emission test fails, balances common‑mode and differential‑mode noise attenuation
6A RMS continuous current rating, fits 115VAC /250VAC 50/60Hz global single‑phase mains grids
Optimized leakage current parameters, avoids ground leakage over‑limit risks for end devices
Robust high‑pot and insulation resistance performance, improves long‑term equipment safety reliability
Fully shielded metal housing reduces internal electromagnetic crosstalk inside device enclosures
Pre‑formed mounting lugs for direct chassis mounting, simplifies mechanical assembly
Operating temperature range: ‑25℃ ~ +100℃, maintains filtering performance under temperature fluctuation

Application

Suitable for single‑phase AC equipment requiring EMC improvement and power‑line noise suppression:

- Electronic equipment failing conducted EMI pre‑compliance & needing EMC rectification
- Cabinet‑type switching power supplies and AC‑DC power converter systems
- Factory automation control panels, relay and contactor control equipment
- Industrial human‑machine interface(HMI), touch screen control terminals
- Security monitoring equipment, industrial surveillance and access‑control devices
- Audio‑visual commercial display equipment, advertising players
- General‑purpose lab equipment, non‑critical measurement apparatus

Electrical Characteristics

Item	Specification
Rated Voltage	115 / 250 VAC
Rated Current	6 A RMS Max. (115VAC & 250VAC)
Operating Frequency	50 / 60 Hz
Leakage Current (Line‑to‑Ground)	0.5 mA Max @115VAC / 60 Hz 1.0 mA Max @250VAC / 50 Hz
Hi‑pot Test (1 min)	Per standard safety specification
Insulation Resistance	≥100 MΩ @500 VDC (Input / Output to Ground)
Operating Temperature Range	‑25 °C ~ +100 °C
Filter Topology	Single‑stage LC (Common‑mode + Differential‑mode)
Insertion Loss	Tested under 50‑Ohm system (data for reference only)

Electrical Schematic & Product Images

Support and Services

Product Overview: High-performance single-phase EMI filter, compliant with international standards.
Technical Support: Refer to the datasheet and installation manual for full specs, wiring diagrams, and safety guidelines.
Installation: Must be performed by qualified personnel; ensure proper grounding and secure connections per applicable electrical codes.
Maintenance: Regular inspection recommended to maintain filter efficiency and extend product lifespan.
Troubleshooting: Verify wiring, check for physical damage, and confirm operating conditions (temperature/humidity) meet specifications.
Custom Solutions: Tailored EMI filter options available, including product testing and certification support. Contact our technical team for application advice and problem resolution.

Frequently Asked Questions

Q1: What safety and environmental certifications does VIP4‑1B‑06 have?

A1: VIP4‑1B‑06 is certified with CE, RoHS and REACH, meeting EU environmental and safety requirements.

Q2: What are voltage, current, temperature & leakage current specs of VIP4‑1B‑06?

A2: Rated voltage: 115/250VAC; Rated current: 6A RMS Max; Operating frequency: 50/60Hz; Operating temperature range: ‑25°C ~ +100°C. Max leakage current: 0.5 mA @115VAC/60Hz, 1.0 mA @250VAC/50Hz.

Q3: What's its hi‑pot standard? Mount type & EMI suppression effect?

A3: Insulation resistance ≥100 MΩ @500VDC (Input / Output to Ground). High‑potential withstand test runs for 1 minute. It is metal‑cased bolt‑mount type with 2×Ø5 mounting holes. Adopts single‑stage LC topology with common‑mode inductor, Cx and Cy capacitors, suppressing both common‑mode and differential‑mode conducted noise for EMC compliance. Insertion loss data is measured under 50‑Ohm system for reference only.

Q4: Do you offer free EMC pre‑test & model selection guide? Can you support EMI rectification for inverters and servo equipment?

A4: Free EMC pre‑test and filter model‑selection guidance are available. We provide professional EMC debugging and EMI rectification solutions for inverters, servo systems and other industrial devices.

Q5: What is the recommended wire cross‑section for VIP4‑1B‑06? Can it suppress high‑frequency interference from servo drives?

A5: The matching wire shall satisfy 6A current‑carrying capacity. Its internal LC filter circuit can effectively attenuate high‑frequency EMI noise generated by servo drives. Actual performance is subject to real‑world installation and system impedance.

Tags:

Power Supply Input Filter 30dB

100dB Emi Filter 10A

Metal Case Emi Filter 10A

Products Details

Home > Products >

Single Phase EMI Filter

Single‑Stage LC EMI Power Filter VIP4‑1B‑06, 6A RMS 115/250VAC Bolt Mount Metal Housing Common‑Mode & Differential‑Mode Noise Suppressor for Power Input EMC Compliance

All Category

EMC EMI Filter

Single Phase EMI Filter

3 Phase EMI Filter

Ferrite Rings Around Cables

DC EMI Filters

AC EMI Filter

IEC EMI Filter

Military EMI Filters

Inverter EMI Filter

PCB Low Pass Filter

EMI Suppression Filter

Clip On Ferrite Core

Snap On Ferrite Choke

EMI Ferrite Core

Flat Ferrite Core

Single‑Stage LC EMI Power Filter VIP4‑1B‑06, 6A RMS 115/250VAC Bolt Mount Metal Housing Common‑Mode & Differential‑Mode Noise Suppressor for Power Input EMC Compliance

Brand Name:	Weiaipu
Model Number:	VIP4-1B-06(B041Q0994)
MOQ:	120PCS
Price:	6-8USD
Packaging Details:	Carton
Payment Terms:	T/T

Detail Information

Product Description

Detail Information

Place of Origin:

Shen Zhen

Brand Name:

Weiaipu

Certification:

CQC CE ROHS TUV CB REACH UL

Model Number:

VIP4-1B-06(B041Q0994)

Voltage Rating:

115/250VAC

Leakagecurrent:

0.5 mA Max @115VAC / 60 Hz1.0 mA Max @250VAC / 50 Hz

Operating Frequency:

50/60Hz

Current Rating:

6A RMS Max

Productname:

Single Phase EMI Filter

Insertion Loss:

Tested Under 50‑Ohm System (data For Reference Only)

Minimum Order Quantity:

120PCS

Price:

6-8USD

Packaging Details:

Carton

Delivery Time:

31days

Payment Terms:

T/T

Supply Ability:

3000PCS/WEEK

Highlight:

Single-Stage LC EMI Power Filter

6A 115/250VAC Bolt Mount Filter

Common-Mode Differential-Mode Noise Suppressor

Product Description

VIP4‑1B‑06 Single‑Stage Single‑Phase EMI Power Line Filter 6A RMS 115/250VAC Metal Case Bolt Mount EMC Noise Suppression Filter for Industrial Automation Test Instrument Power

Product Overview

Highlights

Purpose‑built for solving conducted emission test fails, balances common‑mode and differential‑mode noise attenuation
6A RMS continuous current rating, fits 115VAC /250VAC 50/60Hz global single‑phase mains grids
Optimized leakage current parameters, avoids ground leakage over‑limit risks for end devices
Robust high‑pot and insulation resistance performance, improves long‑term equipment safety reliability
Fully shielded metal housing reduces internal electromagnetic crosstalk inside device enclosures
Pre‑formed mounting lugs for direct chassis mounting, simplifies mechanical assembly
Operating temperature range: ‑25℃ ~ +100℃, maintains filtering performance under temperature fluctuation

Application

Suitable for single‑phase AC equipment requiring EMC improvement and power‑line noise suppression:

Electrical Characteristics

Item	Specification
Rated Voltage	115 / 250 VAC
Rated Current	6 A RMS Max. (115VAC & 250VAC)
Operating Frequency	50 / 60 Hz
Leakage Current (Line‑to‑Ground)	0.5 mA Max @115VAC / 60 Hz 1.0 mA Max @250VAC / 50 Hz
Hi‑pot Test (1 min)	Per standard safety specification
Insulation Resistance	≥100 MΩ @500 VDC (Input / Output to Ground)
Operating Temperature Range	‑25 °C ~ +100 °C
Filter Topology	Single‑stage LC (Common‑mode + Differential‑mode)
Insertion Loss	Tested under 50‑Ohm system (data for reference only)

Electrical Schematic & Product Images

Support and Services

Product Overview: High-performance single-phase EMI filter, compliant with international standards.
Technical Support: Refer to the datasheet and installation manual for full specs, wiring diagrams, and safety guidelines.
Installation: Must be performed by qualified personnel; ensure proper grounding and secure connections per applicable electrical codes.
Maintenance: Regular inspection recommended to maintain filter efficiency and extend product lifespan.
Troubleshooting: Verify wiring, check for physical damage, and confirm operating conditions (temperature/humidity) meet specifications.
Custom Solutions: Tailored EMI filter options available, including product testing and certification support. Contact our technical team for application advice and problem resolution.

Frequently Asked Questions

Q1: What safety and environmental certifications does VIP4‑1B‑06 have?

A1: VIP4‑1B‑06 is certified with CE, RoHS and REACH, meeting EU environmental and safety requirements.

Q2: What are voltage, current, temperature & leakage current specs of VIP4‑1B‑06?

Q3: What's its hi‑pot standard? Mount type & EMI suppression effect?

Q4: Do you offer free EMC pre‑test & model selection guide? Can you support EMI rectification for inverters and servo equipment?

Q5: What is the recommended wire cross‑section for VIP4‑1B‑06? Can it suppress high‑frequency interference from servo drives?

Tags: