V18018 Snap on Ferrite Core 15mm Cable Hole EMI Suppression Magnetic Core Anti-Interference Ferrite Core for Wiring Harness

VIIP V18018 Clip-on Ferrite Core, 15.0mm ID, VN09, RoHS/REACH, EMI/EMC Cable Noise Suppressor

Shenzhen VIIP V18018 EMC Ferrite Core 15.0mm VN09 RoHS REACH Anti-Interference Magnetic Core for Cable Filter

VIIP V18018 split clamp-style ferrite core is engineered for on-site EMC troubleshooting and high-frequency noise suppression for large-diameter pre-installed cables. Unlike solid toroidal cores requiring cable threading, this split ferrite design clamps directly onto finished wiring without cable disassembly or re-termination.

Delivering stable broadband impedance performance across 1-500 MHz, this core provides minimum impedance of 25 Ω at 25 MHz and 70 Ω at 100 MHz. It serves as an effective corrective component for projects suffering unexpected high-frequency conducted and radiated interference, fully complying with RoHS and REACH environmental requirements.

• Reliable physical structure, not easy to break under normal use
• Designed for power harness, data line noise reduction
• Strict dimensional tolerance control
• Mass production stable quality, consistent batch performance
• 15mm clip ferrite core, Snap‑on noise filter core, Ferrite core for wiring harness, High frequency noise suppression ferrite, RoHS REACH ferrite core, EMI filter magnetic core, Cable noise reduction ferrite

Note: Complete dimensional tolerances refer to original approval sheet Rev.4.0. Main dimension reference: A=29.0 mm, B=33.0 mm, C=15.0 mm, D=15.5 mm, E=21.5 mm

• EMC troubleshooting for large‑diameter pre‑installed power and signal cables of photovoltaic energy‑storage cabinets
• High‑frequency noise suppression for heavy‑duty communication harnesses of rail‑transit on‑board auxiliary equipment
• EMI mitigation for external power cables of offshore monitoring and marine sensing devices
• On‑site noise rectification for interconnection cables of underground mining monitoring automation systems

Can I get free samples for ferrite rings and clamps?
Yes, we can provide free samples for our ferrite rings and clamps.

What is your regular order requirement for ferrite rings & clamps?
Normally orders shall follow our minimum package quantity. Exceptions are acceptable for your first trial order.

Does the free-sample policy mean I can place small-quantity orders below MOQ for all orders?
Free samples are for performance verification only. Except for your first order, formal repeat orders need to follow our minimum package quantity requirement.

What certificates do your ferrite cores and clamp-on ferrites have? Can you provide approval sheets?
Our ferrite & clamp-on ferrite comply with RoHS and REACH. We can provide PDF approval sheets (specification document) for your project review.

What is the typical production lead-time for ferrite and clamp-on ferrite mass orders?
Production lead-time is typically 2-5 weeks, depending on order quantity and stock availability. The exact lead-time will be confirmed prior to placing a formal order.

Can you customize impedance/size for ferrite cores and clamp-on ferrites?
Custom service is available upon your technical requirement, MOQ for customized items will apply.

Are clamp-on ferrite rings reusable after installation?
Yes, the snap-on design allows for easy removal and reinstallation, making them reusable.