VIIP V18029 split clamp-style ferrite core is purpose-built for on-site EMC troubleshooting and noise suppression on pre-routed cables. Unlike solid toroidal cores requiring cable threading, this split ferrite design clamps directly onto finished wiring without cable disassembly or re-termination.

Characterized by proven broadband impedance performance across 1-500 MHz, this core delivers minimum impedance of 85 Ω at 25 MHz and 165Ω at 100 MHz. It serves as a practical corrective component for projects facing unexpected high-frequency conducted and radiated interference, fully compliant with RoHS and REACH environmental requirements.

• Rigorous visual defect assessment covers surface cracks, edge chipping and fracture risks, helping sustain low failure rates in end-use applications
• Provides robust attenuation of high-frequency common-mode noise carried over power and signal transmission lines
• Every manufacturing batch undergoes sampling validation across the 1-500 MHz frequency range via internal lab testing resources
• Optimized mechanical robustness to withstand impacts during handling, assembly and transit without performance degradation
• Tool-free mounting solution; no wire stripping or soldering operations needed, cutting down on-site installation time and labour expenses

• High-frequency noise mitigation for control cables within automation cabinet internal wiring assemblies
• EMI countermeasure implementation for communication interfaces of compact industrial sensor modules
• Interference suppression for auxiliary power cabling of smart control terminals and gateway hardware
• Quick EMC fine-tuning for pre-built device samples before formal certification testing
• Noise suppression for short-range signal cables on instrumentation and data-acquisition hardware
• Interference optimization for on-site deployed machinery when hardware modification is restricted
• Cable-borne noise reduction for low-power drive modules and distributed I/O peripheral wiring